A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
If you do decide to make it a full-time business, the sky’s the limit. The house flipper/contractor that I worked for billed clients $35 per hour for painting, and paid his best painters perhaps half of that, so there is room for some profit there. Consider the case of Matt Shoup, who started with $100 and went door-to-door, asking neighbors if they needed some painting done, then built a painting business that earns $2.5 million per year!
• One room or the whole house? Applying one coat in one room is a reasonable DIY Saturday project (especially if you have help and beer). Multiply the time spent moving furniture, prepping walls and sanding old trim by the number of rooms in the house, and you might want to hire real help. It's the same outside. You can probably tackle one shady garage wall that needs a little scraping and sanding plus a coat of paint, but covering all surfaces of the house is usually best left to a pro.
State Contractors  LIC #  388334 , Carry Workers Compensation  Insurance, Liablity Insurance , 36 Years In Painting Business, Over 650 A+ Review in Angie' s List  . We make it a point to never cut corners - keeping you informed throughout the entire project, we are dedicated to understanding and meeting your specific needs for each job. With over 30 years of experience, we are experts at every stage of the process -- from choosing the right paints to the finishing touches.
A qualified exterior house painter can walk you through the process of getting your house ready for a new coat of paint, from scraping and sanding to patching and priming. A pro can also recommend the best exterior paint for the job, whether your siding is wood, fiber cement, stucco, vinyl, or even metal. When it comes to getting the work done, your painter will arrive with all the tools and equipment needed to get the job done quickly, correctly and safely.
If you talk with a painting contractor long enough, you’ll inevitably hear; “There’s no good help out there.” It’s easy to hide behind this excuse, but it’s not true. There are plenty of reliable painters out there, business owners just don’t take the time to find them. It takes TIME to find good people, time you wouldn’t have if you were busy painting.
O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."

Painting Contractors Co

×