5 Pricing. James Lee Painting's pricing was just a notch below the highest bid, but I have to say it was very well worth it, as the attention to detail was excellent, they did some extra work that was not part of the initial quote and they obviously took pride in what they do. At the end of the project, Andrew walked through with me to make sure I was happy with the results, making sure any tiny little touch ups that needed to be done were made.
In my opinion the information on this page should be modified as for the pricing for my area is not correct and the information here could damage the expectations of my or another painting companies pricing. There are too many situations that there is not a way to specify cost prior to seeing the actual house and that information needs to be in big print on this page.
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.

Can't speak highly enough of the service we received from James and his team. I did my due diligence and met with 3 painters. If I'd have met with James first, I might have skipped the other meetings. He talked me out of some extra work that wouldn't have come out the way i'd envisioned and showed me a packet full of successful projects, happy clients that dated back to the 1970s.
Concrete walls must always be prepared before painting, but in some cases previous finishes will also have to be removed so that paint doesn't peel or chip off. Additionally, special sealants, primers and paints may be applied to ensure concrete's endurance in face of the specific elements. Depending on the wall's condition and exposure to the sun, painting professionals will usually estimate between $500 (~250 sq. ft.) and $2,000 (~1,000 sq. ft.), depending on wall area to cover.
Oh, where to begin? Let me start with 'watered down paint'. 25-50% before the material gets to the site? Impossible. You would basically be painting with water at that point. It would be less of a hassle, and cost, to simply use proper material. You would be forced to apply three coats instead of two, as the coverage would be horrible. Whatever cost you think might be saved in materials would be lost in labor.
Whether you decide to do the preparation work yourself or have a professional do it as part of your project, proper preparation makes all the difference in creating a smooth and lasting finish. Sure, it adds to your the total time and money spent on your project, but it's certainly worth doing the job right the first time. Otherwise, you'll spend additional time and money down the line on maintenance and repairs. To ensure proper preparation, follow this process before painting your home's exterior (keeping in mind that the process may vary based on exterior materials):

Hi Elaine, We would be happy to get you connected with a painting and wallpaper pro. You can submit a service request on our website: http://www.homeadvisor.com/ or browse reviews for local pros here: http://www.homeadvisor.com/c.html. We can also have a project advisor reach out to assist you if you send your contact information to [email protected] –HASupport
Repaint — exteriors especially — before visible signs of wear appear, Bancroft says. Don’t wait until you see peeling or flaking paint. “If I have to spend 40 hours preparing the surface before we can paint, that time is going to result in a lot of extra costs. But if I can spend 10 hours preparing the surfaces to be painted, you’re going to save money,” Freeman says.
My son Owen and I thank you for the truly wonderful, informative and entertaining experience provided by the TOH staff, crew and trades-people at the Pro2Pro Brookline event. From Elizabeth - who welcomed us to the event, to Chris, Kevin and others who were wonderful during the orientation session (answering questions that I'm sure you have heard dozens of times before), to Charlie, Kevin, Richard, Heath (the electrician) and Thomas (the program director), you helped us Insiders to understand and appreciate the pride that you take in your work. It was refreshing. I loved the pictures and accompanying text of the event that you posted. I have to say in closing to Chris, Kevin and Thomas (in particular) you gave my son, a budding landscaper, the impetus to continue his pursuit of the trades. Kudos to you all and keep up your great work!
Los Angeles, CA ServicesLOS ANGELES, CAHome Comfort Heating Air ConditioningLOS ANGELES, CACoco Traffic Planners IncLOS ANGELES, CARamiz Window CleaningLOS ANGELES, CALawn Sprinkler RepairLOS ANGELES, CARodolfo ConstructionLOS ANGELES, CAFrancis ConstructionLOS ANGELES, CAModels By MelaniLOS ANGELES, CAS. Zamora GlassLOS ANGELES, CATadi BrothersLOS ANGELES, CAGemini HVACLOS ANGELES, CAKaios IncLOS ANGELES, CAF.S.G.M
Over the past year I have had several jobs given to 2 Angie's list recommendations and 1 not from a recommendation. They all have one thing in common, lack of sufficient and correct preparation to save time, labor, and the fact that they put a person in charge that was a cut corners type of worker. The two from Angie's list sent worker/s back to try touch up problems, but once the job is not prepared correctly in the first place any extra work is like putting a band-aid on a dirty wound.
Sorry it is difficult to trust almost anyone in the trades. It is easier to do the work myself and not deal with strangers in and around my house. When I have to hire someone I tell them up front that I'll be checking every detail, pay extra to purchase the materials myself, and if they don't want the job - well good! I always fine someone who will work with me as I pay a bonus for that.

6/12/2018 Thank you for your review.  We have researched our records and have been unable to match a completed… Thank you for your review.  We have researched our records and have been unable to match a completed project with your information.  If this is a project we have completed under another name; we would like to make the effort to address your concerns.   We value our client's feedback.  Best regards, Nick Read more


We do our best to screen all of our painters. However, there are still some painter professionals in Grand Prairie that have not been pre-screened. This means that their licenses may not be up to date to operate in Grand Prairie or TX. Always be sure to pre-screen them yourself before hiring. Here are some unscreened professionals offering painting services:
When hiring a contractor it is always best to hire one who is personally referred to you by someone you trust. Hiring through ads or phone book is hit and miss. Check with your local paints stores, they know the good guys from the bottom feeders. Go to the stores that sell the high quality paints like Benjamin Moore(nonpareil), Pittsburg, Sherwin Williams or Glidden. Don't go the the big box stores for referrals, the people there don't know squat!

Disclaimer: NerdWallet strives to keep its information accurate and up to date. This information may be different than what you see when you visit a financial institution, service provider or specific product’s site. All financial products, shopping products and services are presented without warranty. When evaluating offers, please review the financial institution’s Terms and Conditions. Pre-qualified offers are not binding. If you find discrepancies with your credit score or information from your credit report, please contact TransUnion® directly.
Small random-orbit or pad sanders make this job go faster. (Wallis first covers these boundaries with Synkoloid patching compound so no edge is visible after sanding.) As shown, you want to make sure that there is a feathered, smooth transition from exposed wood to old paint. For areas that might get close scrutiny, you can follow up with a 100- or 120-grit rubdown to erase any scratches.
O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."

Painting Contractors Co

×