ScotchBlue Advanced Multi-Surface Painter's Tape 2093EL features exclusive ScotchBlue Advanced Multi-Surface Painter's Tape 2093EL features exclusive Advanced Edge-Lock Paint Line Protector to deliver super sharp paint lines. This tape removes cleanly for up to 14-days without surface or paint damage even when exposed to direct sunlight. ScotchBlue Advanced Multi-Surface Painter's Tape has a medium adhesion level and is ...  More + Product Details Close
You want to convert a wall to dry erase board, coat it in clear or change the color of the wall. If you want it to match your filing cabinets and cubicles we can coat your wall with metallic colors.No longer do you have to have a WHITE dry erase board. You can now have it clear or colors for any surface. You can coat any chalkboard with clear and turn it into a dry erase board. It is now your choice for your décor. See our dry erase painting video here.
Wilson & Hampton provides the premier system for coating metal surfaces. Electrostatic painting is an efficient process where you can upgrade and rejuvenate your entire office or factory area in your choice of finishes at a fraction of the re-placement cost. Cabinets, lockers, machinery, Bathroom Partitions and much more can be painted in-shop or on-site by drawing the paint directly to the metal surface to be painted and “wrapping” around it, leaving no drips, spatter, or over spray.
Paint will be your next-biggest cost, at anywhere from $20 to $70 or more per gallon, depending on the sheen, the grade you’ve chosen and any special features. Some paints, for instance, are mold resistant. Others suppress smells or require fewer coats. Some have a lifetime warranty. Paints with warranties, however, may not be worth a higher price. In Consumer Reports tests approximating nine years of wear, only a few exterior paints and stains with lifetime warranties held up well. But “you’ll grow tired of the color long before a good-quality paint wears out,” Bancroft says.

A fresh paint job has the power to totally transform the look of your house in less time and for less cash than any other remodeling project. That thin skin of resin and pigment also protects your investment, shielding it from sun, wind, and rain—until the paint begins to crack and peel, that is. Then it's time to button up with a couple of new coats. Properly applied, new paint should last for a good 15 years, provided you use top-quality materials, apply them with care (and with an eye on the weather), and, most important, clean and sand every surface first. Here's what you need to know to get a first-class finish on your home's exterior.
O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."

Painting Contractors Co

×