A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
The time needed to complete an exterior paint job varies depending on the size of the home, the condition of your home’s exterior, the weather conditions and type of paint used on the job. An average project lasts 3-4 days, while a complex project may take a week or more. Additional time may be needed to fix loose or damaged siding or add primer to areas without coverage. Your painter will provide a timeline that explains how long the project will last and will schedule the job to avoid inclement weather.
Prep. For new work the painter accepts the finish done by the drywall or plaster and once he accepts the work and starts painting he owns any wall repairs. Existing work is a different thing. I take a high intensity light and circle the kinds of defects with chalk so we are all in agreement before they start. Sometimes this results in a higher price and we have to compromise on how much to do...
When you choose Five Star Painting residential house painting contractors, you can feel confident that you are hiring the best in the business. Local Five Star painters have been serving clients throughout the United States and Canada since 2004. From taking time to prepare the area to using exactly the right equipment for each job, we make sure the project is done correctly. Our experience shows: We’re good at what we do, and our clients are always happy with the work we leave behind!
To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.
This is an unsolicited recommendation for Florida Home Painters who have twice painted our home, which is less than 5,000 square feet under air conditioning in Lighthouse Point with a 180-foot dock. Joe has painted the outside house, trim, painted the two concrete walls, painted the sea wall cap, stained the dock and replaced planks, along with painting the inside walls, ceilings and trim. Joe has an excellent eye to match paint and makes suggestions with the ability to explain his recommendations and he can repair problems so a separate crew or repairperson is not needed for every little item that might be wrong around the home and property. I tend to be perfectionistic and detailed and Joe has the adaptability to deal with me and my wife along with my hours of work. In the past, I trusted no one to paint our house so I did all the painting. I trust Joe and his careful crew, and he is always willing to try an idea I have come up with - which is typically a mistake of mine - which he easily corrects. Joe is always available, shows up frequently, and is always involved directly or indirectly with repairs. It is a pleasure to deal with an English-speaking American who is obviously never intoxicated or high on drugs. As a resident of Florida since 1970, a Ph.D. (70-year-old) psychologist who has been in practice 40 years and a professor in a doctoral program, I am a reliable judge of character, reliability, and workmanship. I want to encourage homeowners to contact Joe for an estimate since you can always see his workmanship throughout the tri-county
Painters should have a proper business license; this gives them access to wholesale pricing and lines of credit at a paint supply store. It's also important that your painter is bonded and insured. Bonding means that a third party company has reviewed the professional and has granted him or her a certain amount of surety bonding. The bond helps protect the homeowner from financial damage if the contractor refuses to complete work or doesn't pay subcontractors. Insurance protects both the painter and the homeowner in the event of an accident, injury or damage to the property. Ask to see all of these pieces of information and verify the dollar amounts.
Removing and installing wallpaper can be a tricky task. The crew at CertaPro Painters® is skilled in removing wallpaper and will make this time-consuming task, hassle-free for you. We will work with you to help you choose a wallcoverings style that’s perfect for your home, and then apply it to your walls. All you’ll have to do is enjoy the final look.
Our family owned and operated painting company is your one stop shop for interior painting, exterior painting, and home repairs. We are a quality first painting company. Our expert team of painters provides quality work and experience that can be measured. Allow our expert team of painters to show you a level of home painting that you can be proud of.

The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture.


Painting contractors must also carry out administrative and marketing duties. They prepare final accounts for customers based on the original estimates and any additional work. They analyze the cost of the job compared with the estimate to calculate their profit. They market their business through activities such as setting up websites, asking customers for references or contacting property maintenance companies with details of their services.
12/27/2018 Excellent!   Thank you for taking the time and effort to share your experience with Lighthouse… Excellent!   Thank you for taking the time and effort to share your experience with Lighthouse Painting.  We are committed to meeting / exceeding our customer's expectations.   We are pleased to hear your comments.  It was a pleasure working with you on your home improvement project.  Best wishes for the coming New Year 2019.
The PREP Study is attempting to reduce isocyanate, dust and solvent exposures for autobody shop workers in Connecticut. We have produced a user-friendly DVD-based training program with a great deal of input from the autobody community. The DVD contains information for painters, autobody technicians and anyone else working around a body shop, including:
I do not mean to come off with an edge, however, this is an article for people hiring low bid, uninsured, one man band painters out to "hustle" a buck. Hire reputable, established companies or hire someone you know or have a strong referral from. If you are arguing over watered down paint, ticky, tacky deposits, buying your own supplies, you have hired the wrong guy.

Since 1980, House Painting Inc. has aimed for excellence in painting contractor services. Our painters specialize in extensive prep work for the best finished painting results. We respond quickly to customer requests for estimates and job starts. We have earned our reputation as the best painting company in Los Angeles, Pasadena, Santa Monica and the surrounding area.


Every painting job develops a unique choreography as ladders go up and come down and tarps are unrolled and folded up. But two basic principles remain: 1) Start at the top and work down. 2) Work in the shade, out of the sun's glare. As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)
Save yourself time, stop looking for another painter, and call Nick at Lighthouse Painting. I chose Lighthouse to paint the inside and outside of my house due to all of the positive reviews on Yelp. Wise choice. I chose them for a second project due to the amazing job they did on the first job. They do clean work, show up on time, and make sure the customer is 100% satisfied. I could not be more pleased with the results. Nick's team is also terrific at remodeling tasks such as laying tile. I would give six stars if I could. I will use them for every painting project going forward.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.

{ "galleryConfig" : {"galleryTitle":"Videos","galleryItems":[{"id":null,"title":"Structural Repair","url":"http://vimeo.com/229142342","mediaSources":null,"description":"Hazards and proper protection while cutting, grinding, welding.","duration":"5:33","thumbnailUrl":"http://i.vimeocdn.com/video/649374900_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOiUDl4xTsMb8+0quFv997QgNdWvZz2Mbmg8j7OjOgbVQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGP+jFPOyZ3ee6DwfQI8JX24ZFxnZmPEyIqLsTlFciGOsw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Surface Preparation","url":"http://vimeo.com/229114680","mediaSources":null,"description":"Sanding, body filler, solvent wipe down, masking.","duration":"5:30","thumbnailUrl":"http://i.vimeocdn.com/video/649340426_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMPQ/0SzwNC3qxmyzA8rh00JfmhCsY9z0rrOPlnSeOSvA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMqwTDDrdISKJcoFG8R0GddY6B6Mr2/EiEafjBSbL0SbQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Painting","url":"http://vimeo.com/229184542","mediaSources":null,"description":"Mixing coatings, spraying paint, gun cleaning, unmasking.","duration":"12:37","thumbnailUrl":"http://i.vimeocdn.com/video/649429175_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNhkGLICbyNlpZf/0EhR5YbWUtqEe8183loncNEzZwGsA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeNJ2dENagcj+OrbkimC85zy6ras5C1T9u1nBUl9fGxnYg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Overview)","url":"http://vimeo.com/229115324","mediaSources":null,"description":"Choosing the best type respirator for your tasks, fit testing","duration":"03:49","thumbnailUrl":"http://i.vimeocdn.com/video/649341202_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNtImajjNHe6jARBiHcD6VuepuJy0zv0FvKpqmb8JUNRg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGOSyvZoO5VShIctdMhYrO1ZSYUXz4tfP32j02f90eXfFw== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Cleaning and Storage)","url":"http://vimeo.com/228865270","mediaSources":null,"description":"How to clean and maintain your respirator.","duration":"1:46","thumbnailUrl":"http://i.vimeocdn.com/video/649027412_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf4nf0pOeIZcw+VAfgeGBpy0AaSxT7b2QvnLKXY3ZpVyuQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf6dcUZO3dHOxWIvJ+SgFrwgcao7j60JKvPDJahmfVir4Q== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Respiratory Protection (Donning a Half Mask Respirator) ","url":"http://vimeo.com/229146171","mediaSources":null,"description":"Putting on (donning) and fitting a respirator, pressure checks.","duration":"1:57","thumbnailUrl":"http://i.vimeocdn.com/video/649379748_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGMkSWDfi0it7h5AX6KfLIovgb+7GyvMtXXt34r9qBjDXQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNa9+q+2lXYwFigwR5wFjtuqcyyAuBkZmAv86gMxzrunQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Chemical Resistant Gloves","url":"http://vimeo.com/228970893","mediaSources":null,"description":"Gloves to protect against solvents, isocyanates and dusts","duration":"02:23","thumbnailUrl":"http://i.vimeocdn.com/video/649161993_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8hjG/6VSgBBA23GFpzQ5vrSEdT1sdNAWrIfRJelqOAEQg== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4ApusfQtYkvFK3xf1J9Yh8iVC8uiDwyTy73nbFlsCCU1jmdouKKtJvd5XCoIF3RLrg== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Isocyanate Health Hazards","url":"http://vimeo.com/229123604","mediaSources":null,"description":"Isocyanates can cause asthma and airway irritation .","duration":"6:06","thumbnailUrl":"http://i.vimeocdn.com/video/649351377_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGM+LTxO7+opIKVkifEOFsC6cAa7qyBAOoTwcZcKylUeIQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4BQgbAg4nbVFeaPAz7ndMGNToiixt8ivhkn14FvljjLq4oFgFgi/rZZhhOSDo3Qe5A== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Solvent Health Hazards","url":"http://vimeo.com/229167358","mediaSources":null,"description":"Effects of solvent exposure: skin, nervous system, liver, etc.","duration":"03:26","thumbnailUrl":"http://i.vimeocdn.com/video/649407194_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BePhRTr7dbZIdQdP6K/RHlVvJZ33hOEbslHHahu2n/+qzQ== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JG68n7USdqX5tmxic46BeMUXLf4Bhuxq/WQ0stgUJ8ofKafv4dkRuhy+ly27/70MQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0},{"id":null,"title":"Sources of Information","url":"http://vimeo.com/228865887","mediaSources":null,"description":"MSDSs, routes of exposure, signs and symptoms of exposure","duration":"03:30","thumbnailUrl":"http://i.vimeocdn.com/video/649028172_640.jpg","thumbnailUrlResized":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf5/d77jNMgv0uxh2lleucWIelZHfuxL/Y9qMtSOvx87sA== 1x","thumbnailUrlResizedModal":"https://cdn2.medicine.yale.edu/url/6arvl7mGocI2gMSMhmhX4JuN0jchEY8zjiCfQB+kYf60tYR5hWn95e5+iSGICXG5Ty9pruywoJUwZiJy1iK/lQ== 1x","galleryItemType":2,"credit":null,"transcriptUrl":null,"transcriptText":null,"illustrationCredit":null,"ComponentTemplate":null,"Page":null,"PagePosition":0}],"itemsToLoadIds":[],"slideRowsCount":0}, "displayStyle": "video-gallery-widget" }
As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.
At Performance Painting Contractors, we provide top quality industrial coating solutions to maintain any industrial facility, warehouse walls, industrial machinery, floors and much more. Our expert painters are certified and follow all regulatory and safety compliance guidelines of any industrial environment. Performance Painting will provide expert project management and skilled painters for your industrial project.
I made the HUGE mistake of hiring Certa Pro to do several interior rooms of my house, and remove popcorn ceiling in a bathroom. What a nightmare! They didn't paint any door jams, they broke a cedar window sill-and didn't bother telling me, they gouged a hardwood floor, they never sealed the room that had the popcorn removed--causing white powder to be in all rooms of a 2 story home. I can go on and on. Horrible company

Painting professionals might charge more or less to paint your home's exterior based on its construction material. Some materials cost more to paint than others because of their texture, the paint required to properly cover them, and whether specialized materials are required to prepare them for painting or the elements. Find more information on the various types of siding available, as well as how much it might cost to paint or prepare each.

Home Painter Co

×