Every painting job develops a unique choreography as ladders go up and come down and tarps are unrolled and folded up. But two basic principles remain: 1) Start at the top and work down. 2) Work in the shade, out of the sun's glare. As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)


Recently I had the outside of my home painted. The contractor wrote a good contract, but I failed to realize that some things were not in it. It reminds me of the car dealer who offered a good price on a new car but failed to mention that it did not include tires. My contractor failed to specify that lattice under a porch was included. So the painters did not paint it. To his credit, he did instruct them to paint it when I brought it to his attention. If I had the job to do over again I would look for an individual who came with referrals from happy customers rather than a franchise owner..
I am getting quotes to paint the exterior of a 2,500 sq ft split levei home that just had all new windows and pre-primed Hardiplank installed 3 months ago. the quotes are up to $2,500 different ranging from power wash,prime again 3 coats of paint to no powerwash needed so soon and one coat of paint.. All quotes include trim. One includes complete replacement of 80 feet facia boards another just 40 feet.
 I started my young life as a yacht painter in my grandfather's boat shop at 12 and have been painting and house building all my life. We built boats of wood because we had nothing better, we built homes of wood because we had nothing better. I grew up putting wood siding (cedar, redwood) on houses, it was the best we had. Now I tell people use cement siding, paint it once every thirty years if it needs it or not.

Contractors apply several layers of paint to achieve a suitable finish. They leave the first coat to dry for the recommended time and apply one or more finishing coats. They might choose paints with special qualities for different types of room. Manufacturers have developed paints for bathrooms or kitchens that have good resistance to moisture for example. When they have completed painting, they clear away any equipment and restore the area to its original condition.
This all comes down to the rules.....1. references....does the contractor have them??? I ALWAYS furnish all my prospective customers them....no excuses...2. insurance....again, I always furnish proof....3. Read the proposal carefully...I ALWAYS list materials down to tape used, the brand, the grit of sandpaper, the manufacturer, etc....its INEXCUSABLE to not list all of these items....I am a member of the PDCA, the Painting and Decorating Contractors of America, the foremost authority in the coatings industry and they also approve of what I listed....if you do not follow these guidelines, you will NOT get a job reflective of "professional". Look for the PDCA where any painting contractors are, if they are not a member, RUN!
6/12/2018 Thank you for your review.  We have researched our records and have been unable to match a completed… Thank you for your review.  We have researched our records and have been unable to match a completed project with your information.  If this is a project we have completed under another name; we would like to make the effort to address your concerns.   We value our client's feedback.  Best regards, Nick Read more
Picking exterior house paint colors is a lot different than picking a color for a shirt or a car.  It may help to drive around to observe colors that other homeowners have combined on homes that are of similar size and design as yours.  There are also online resources that provide homeowners with the ability to create virtual makeovers of their home by combining colors together through their software programs as well.
The cost to paint the exterior of your home will vary depending on the size of your home, the condition of your siding, type of paint used and other factors. The average cost for labor and supplies ranges between $1,800-$3,800 and it may cost $6,500 or more for a large, custom project. In addition, you may need to pay more if there is damage to your siding or other challenging aspects of your job.

The PREP Study is attempting to reduce isocyanate, dust and solvent exposures for autobody shop workers in Connecticut. We have produced a user-friendly DVD-based training program with a great deal of input from the autobody community. The DVD contains information for painters, autobody technicians and anyone else working around a body shop, including:
As a former professional painter, something that drives me crazy is when I see painters cut in around wall plates. First of all, the amount of time that it takes to cut in is usually much longer than the amount of time that it takes to simply remove the wall plate. Secondly it does not look nearly as clean as it does when the wall plate is removed and thirdly it can invariably leave paint on the wall plate itself which also looks sloppy. Make sure the painter takes them off and then reinstalls them. It's less time.
Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate flashing and texture differences.
PSA: Color psychology is a thing. The right soothing hue can work wonders for your mind and soul. You might think that only works for pale blues, but the contrast of a light and dark color — or, in this case, off-white walls with chocolate brown and deep blue accents — has a powerful effect. "The darker color grounds the room, and then the lighter runs right up to the ceiling and makes it feel higher. It creates this serene atmosphere," designer Laura Bohn told us.
Wilson & Hampton provides the premier system for coating metal surfaces. Electrostatic painting is an efficient process where you can upgrade and rejuvenate your entire office or factory area in your choice of finishes at a fraction of the re-placement cost. Cabinets, lockers, machinery, Bathroom Partitions and much more can be painted in-shop or on-site by drawing the paint directly to the metal surface to be painted and “wrapping” around it, leaving no drips, spatter, or over spray.
Hi Donnie, Thanks for your comment! We would be happy to help you connect with a fencing pro to give you an estimate on your project. You can submit a request to our pros here: www.homeadvisor.com, browse a list of local pros here: http://www.homeadvisor.com/c.html, or send your info to [email protected] and a project advisor will reach out to assist you. –HASupport
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.

Scotch Painting Production Masking Tape is the professional's Scotch Painting Production Masking Tape is the professional's choice in projects where higher adhesion tapes are needed. This tape's high adhesion level makes it ideal for most coated and non-damageable surfaces. Scotch Painting Production Masking Tape provide exceptional durability and staying power yet still offers the same clean removal you ...  More + Product Details Close


If you are going to hire a contractor (professional painter) give a room by room punch list of the fixing of holes small or big, have it identified for the painter to tell you if you need a drywall finisher or if he does this type of work good. Wall repairs can be 3-5 steps to do repairs ( one per day for good drying of patching material and a good sanding) this is what gives you a good paint job only using high quality paint.
There's no denying that a fresh coat of paint (whether interior or exterior) can significantly improve the appearance of a property. While other home improvement projects might claim to add more value or function to your home, painting has long been a popular way to boost curb appeal or create a more pleasing atmosphere indoors. When it comes time to paint your home, there are basically only two options: do it yourself or hire a professional home painter. Sacramento homeowners will find that both of these paths have their good and bad points, but for those who want the best job possible in the shortest amount of time (not to mention with the least amount of effort), there is simply no substitute for hiring a pro.
This is my second time using House Painting and both experiences were excellent. They painted the exterior and interior and worked straight through the job which took about seven days. I found his pricing to be reasonable and not expensive. The crew was exceptionally courteous and quiet and I never felt uncomfortable with them around or in the house. The job was well done in a professional manner and they were sure to be careful with your things and prepped everything properly. I would use them again and I did. I have a nice well-cared home that I am very particular about. I find that everyone wants a good review these days even when they don't deserve one so I usually don't do them much anymore and only when the company is really good and when they truly deserve me investing my time to review them. House Painting Inc. does deserve to have the 5 Star rating!
With that said, here's the reality of that particular scenario. Painters do put water in the paint, but not for reasons you would think. Some materials need to have their viscosity manipulated in order to slow drying time, allowing gravity to 'smooth' out the product for a better finish. It also prevents 'drags' and 'sausages'. I personally try not to do it too often, but from time to time I have to. I want my client to have a proper finish.
Not only do I agree with what you are saying; but, I will not use Angie's List for referrals again. Their "A" rated painter did some of the exact things they are now warning against; however, they are still rated "A". I sent in a review and it took eight weeks to post it. They allowed the contractor to lie about what happened as a response. I had proof and photos. Angie's List is a scam; instead ask neighbors and friends for referrals!

Over the past year I have had several jobs given to 2 Angie's list recommendations and 1 not from a recommendation. They all have one thing in common, lack of sufficient and correct preparation to save time, labor, and the fact that they put a person in charge that was a cut corners type of worker. The two from Angie's list sent worker/s back to try touch up problems, but once the job is not prepared correctly in the first place any extra work is like putting a band-aid on a dirty wound.
×