I needed to get the walls by my pool deck resealed and cracks in the stucco replaced. There was also large amounts of cracking/water damage at the bottom of my garage wall. Nick came in to give a quote in a very timely fashion and came in with a very good quote for the repairs. Nick's crew was very friendly and did a good job but, after the original wall sealant settled and dried there were gaps between the concrete and the wall. I notified Lighthouse that there was a problem with the urethane sealant and sent over some pictures. Theresa and Nick had someone come out two days later to fix it and now it looks AWESOME!
Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.
Updated review from a 1 to a 4. Our start was a bit rough, but Nick works hard to make his customers happy and I appreciate that, even for a small job. After a late appointment and cancelled work date, Lighthouse Painting met my tight deadline by starting the job at 6 am. Their pricing was the most competitive, the quality of work is good, and the painters are professional. His team caulked and painted my baseboards, painted a fireplace, and sanded and painted a wood wall in 6 hours. Thanks Lighthouse!
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
The article and comments were great information to have before deciding how to go about getting a painting job done. I think the important point is that there are several key choices (who to do the work; color, sheen, quality, of paint; how many coats; amount of prep/repairs to be done and by whom, how long the job will take, provisions for changes, how detailed the contract needs to be; advanced deposit/progress payments/final payment; final inspection, etc.) that need to be made and it requires advanced research and planning in order to become well enough informed to make the right choices. Then it requires spending sufficient time to check materials and inspect the quality of the work while it is on-going, raher than waiting to do it all at the end. President Reagan's philosophy of "Trust, but verify." applies.
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
Vinyl siding is one of the more inexpensive siding materials to have repainted, especially with recent innovations in painting materials. Homeowners will first need to vinyl cleaned and repaired, and any clapboards or vinyl sections that have blown off because of climate conditions will need to be replaced. Painting professionals will apply paint quickly and easily over the vinyl siding, much like an interior paint job. The finish, however, may require extensive work and regular maintenance. Expect to pay between $600 (~250 sq. ft.) and $2,000 (~1,000 sq. ft.), with prices likely increasing for the finish. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather conditions.
O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."
Painting Contractors Co