I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
Wilson Hampton Painting Contractors is Southern California’s most trusted name in wood finishing. From fine furniture refinishing and restoration to custom case work and Specialty finishes, we pride ourselves in returning wood furnishings back to their natural beauty. We can also age the look or create an exotic look of distress, crackling or glazing. Learn more about Wilson & Hampton Painting Contractors.
12/27/2018 Excellent!   Thank you for taking the time and effort to share your experience with Lighthouse… Excellent!   Thank you for taking the time and effort to share your experience with Lighthouse Painting.  We are committed to meeting / exceeding our customer's expectations.   We are pleased to hear your comments.  It was a pleasure working with you on your home improvement project.  Best wishes for the coming New Year 2019.
Before the scrubdown, protect nearby plants by misting their leaves and saturating the surrounding soil with water, pulling them away from the house, and shrouding them in fabric drop cloths. (Plants will cook under plastic.) Lay more drop cloths along the base of the walls to collect any falling paint debris. Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.

When determining the total cost of a home exterior paint project, you'll want to include the cost of materials like paint, supplies and other items you might want to cover in addition to the siding. If you know the average cost of these items in addition to your home exterior project cost, you'll have a good plan in place when you start calling for professional estimates. This also gives you the option to purchase or paint some items yourself to save money. Here are some of those cost factors and what you might expect to pay:
We have a deep desire to prove to each and every client that hires us how a professional team of quality home painters works together to accomplish the goal of complete customer satisfaction to make sure the next time you need a painter there is no question on who you are going to call because of the previous experiences that you have had with our group.

So sad that Angie's List requires the contractor be notified!! They have lost me as a client. If I'm dissatisfied and want to give an "F" rating (question/workers...I SHOULD NOT be intimidated into passing up an opportunity to explain my experience! There is NO WAY my contractor got an Aplus rating from over five hundred people....so someone was lying....yet I can't report that without the contractor knowing it? REALLY?
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.
After any areas repaired in the previous step are primed, we apply premium quality paints for a uniform finish. There are multiple finish options, including flat, matte, eggshell, satin, semi-gloss, and high-gloss, and we will have gone over the benefits of each with you beforehand so you can make an informed decision. The time will vary depending on the size of the job, but we will always ensure to work as quickly and efficiently as possible.
If you paint over dirty, oily surfaces, the paint will easily chip or peel off. So before painting, clean grimy areas with a deglosser or heavy-duty cleaner intended for prepaint cleaning. They work well to clean painted, varnished or enameled surfaces to improve the adhesion of the new paint. They’re ideal for cleaning greasy or oily areas like kitchen and bathroom walls and removing hand marks around light switches and doorknobs.
Our project foreman, as well as our staff, are full time, professional house painters which means that our attention to detail is second to none when it comes to your project. From selecting the right date to start the project, colors, project staging through to completion, we concern ourselves with every single aspect to make sure that your complete satisfaction has been reached. We will not stop until it has been achieved.
I hired this person because he was listed on Angie's List. This man claimed he took and passed his contractor's license test after he signed me up for a project (Feb.) that included fixing cracks, painting, repairing a gate, installing a screen door, etc. He said he would charge me the original "handyman" prices. He postponed the start date, brought one worker who fixed a few cracks, repainted the gate terribly, but ruined a dining room ceiling when his worker used silicone in a tube instead of the expansion tape, spray ceiling covering, and paint I had purchased saying this silicone was "better". Then they said they would have to paint the whole ceiling and charge extra. They left holes in the walls and did a sloppy paint job in several places. I just paid them to get them out of my home as I felt intimidated as a senior citizen who is handicapped. I will try to have the main guy come back when I let him know what I need redone. Don't know if he will come back without charging me more.
OF the different type of customers there are at least two: cheap charley's and people who want great results. I agree the need for wall repair is critical to the end results. Most critical is for the customer to be told ahead that the walls are going to need exactly what is needed. This means the contractor must look, touch, examine the walls for defects and needed work. I've been a building manager for 40 years and seen a few paint jobs. Typically a contractor does a lot of talking about how expert he is, but the guys who walk through with note pads, iPads, examine, measure, point things out, explain and recommend are the ones I will deal with. It confirms if they know what the business. Nobody likes the workers to show up and when you talk about the job they're going to do they know nothing but they we were told to be here. Their boss who bid the job doesn't supervise - a big no no around here. Nobody likes surprises or worse, at the end of a job that's not right getting a bunch of little kid excuses. Contractors that do not like the customer to be around looking at the progress don't get the job. Click Here Painting Contractors Denver, CO
×